Config Mikrotik R2

From DAFA WIKI
Revision as of 09:09, 11 April 2026 by Ihsan (talk | contribs)
Jump to navigation Jump to search

Setting Identity

System - Identity

ganti nam dengan R2

Identity.png

Setting Bridge Interface

Bridge - Klik tombol + Trus Klik Ok

Bidge Setting.png Kemudian tab pada menu port trus klik tombol +, Masukkan port ether2 dan ether3 pada Brdige

Kemudian tab pada menu port trus klik tombol +, Masukkan port ether2 dan ether3 pada Brdige

Port bridge .png

Setting ip address

ip-addess-add

address=10.200.200.2/30 - interface=ether1

address=172.17.200.1/28 - interface=bridge1

Address ether 1.png


Ether bridge.png

Setting DNS server

ip - dns - server = 8.8.8.8 - centang allow-remote-request

Dns server.png

Setting DHCP Server

ip - dhcp-server - DHCP setup

server interface pilih bridge1 kemudian klik next trus dampek selesai

DHCP server.png

Setting NAT

ip - firewal - tab NAT - add - Tab General chain=srcnat - out-interface=ether1 - tab Action - action=masquerade

Nat.png

Setting Route

ip - route - add - Dst-addres=0.0.0.0/0 - gateway=10.200.200.1

trus add route lagi

dst-address=172.16.200.0/29 - gateway=10.200.200.1

Route1.png
Retrieved from "https://wiki.darulfalahsukorejo.com/index.php?title=Config_Mikrotik_R2&oldid=52"