Config Mikrotik R2: Difference between revisions
No edit summary |
mNo edit summary |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 7: | Line 7: | ||
=== Setting Bridge Interface === | === Setting Bridge Interface === | ||
<code>Bridge - Klik tombol + Trus Klik Ok</code> | <code>Bridge - Klik tombol + Trus Klik Ok</code> | ||
[[File:Bidge_Setting.png|none|thumb]] | |||
[[File: | |||
Kemudian tab pada menu '''port''' trus klik tombol '''+,''' Masukkan port ether2 dan ether3 pada Brdige | Kemudian tab pada menu '''port''' trus klik tombol '''+,''' Masukkan port ether2 dan ether3 pada Brdige | ||
| Line 44: | Line 42: | ||
<code>dst-address=172.16.200.0/29 - gateway=10.200.200.1</code> | <code>dst-address=172.16.200.0/29 - gateway=10.200.200.1</code> | ||
[[File:Route1.png | |||
== [[File:Route1.png]] == | |||
== Config CLI R2 == | |||
=== Setting Identity === | |||
<code>system identity set name=R2</code> | |||
=== Setting Bridge Interface === | |||
<code>interface bridge add name=bridge1</code> | |||
<code>interface bridge port add interface=ether2 bridge=bridge1</code> | |||
<code>interface bridge port add interface=ether3 bridge=bridge1</code> | |||
=== Setting Ip address === | |||
<code>ip address add address=10.200.200.2/30 interface=ether1</code> | |||
<code>ip address add address=172.17.200.1/28 interface=bridge1</code> | |||
=== Setting DNS Server === | |||
<code>ip dns set servers=8.8.8.8 allow-remote-requests=yes</code> | |||
=== Setting DHCP-Server === | |||
<code>ip dhcp-server setup</code> | |||
Trus tekan enter kemudian interface pilih ''bridge1, Kemudian tekan enter sampai selesai'' | |||
=== Setting Nat === | |||
<code>ip firewall nat add chain=srcnat out-interface=ether1 action=masquerade</code> | |||
=== Setting Routing Static === | |||
<code>ip route add dst-address=172.16.200.0/29 gateway=10.200.200.1</code> | |||
<code>ip route add gateway=10.200.200.1</code> | |||
=== Setting User === | |||
<code>user add name=asesi_200 password=123455678 group=full</code> | |||
Latest revision as of 04:42, 16 April 2026
Setting Identity
System - Identity
ganti nam dengan R2
Setting Bridge Interface
Bridge - Klik tombol + Trus Klik Ok
Kemudian tab pada menu port trus klik tombol +, Masukkan port ether2 dan ether3 pada Brdige
Setting ip address
ip-addess-add
address=10.200.200.2/30 - interface=ether1
address=172.17.200.1/28 - interface=bridge1
Setting DNS server
ip - dns - server = 8.8.8.8 - centang allow-remote-request
Setting DHCP Server
ip - dhcp-server - DHCP setup
server interface pilih bridge1 kemudian klik next trus dampek selesai
Setting NAT
ip - firewal - tab NAT - add - Tab General chain=srcnat - out-interface=ether1 - tab Action - action=masquerade
Setting Route
ip - route - add - Dst-addres=0.0.0.0/0 - gateway=10.200.200.1
trus add route lagi
dst-address=172.16.200.0/29 - gateway=10.200.200.1
Config CLI R2
Setting Identity
system identity set name=R2
Setting Bridge Interface
interface bridge add name=bridge1
interface bridge port add interface=ether2 bridge=bridge1
interface bridge port add interface=ether3 bridge=bridge1
Setting Ip address
ip address add address=10.200.200.2/30 interface=ether1
ip address add address=172.17.200.1/28 interface=bridge1
Setting DNS Server
ip dns set servers=8.8.8.8 allow-remote-requests=yes
Setting DHCP-Server
ip dhcp-server setup
Trus tekan enter kemudian interface pilih bridge1, Kemudian tekan enter sampai selesai
Setting Nat
ip firewall nat add chain=srcnat out-interface=ether1 action=masquerade
Setting Routing Static
ip route add dst-address=172.16.200.0/29 gateway=10.200.200.1
ip route add gateway=10.200.200.1
Setting User
user add name=asesi_200 password=123455678 group=full