Config Mikrotik R2

Setting Identity

System - Identity

ganti nam dengan R2

Setting Bridge Interface

Bridge - Klik tombol + Trus Klik Ok

Kemudian tab pada menu port trus klik tombol +, Masukkan port ether2 dan ether3 pada Brdige

Setting ip address

ip-addess-add

address=10.200.200.2/30 - interface=ether1

address=172.17.200.1/28 - interface=bridge1

Setting DNS server

ip - dns - server = 8.8.8.8 - centang allow-remote-request

Setting DHCP Server

ip - dhcp-server - DHCP setup

server interface pilih bridge1 kemudian klik next trus dampek selesai

Setting NAT

ip - firewal - tab NAT - add - Tab General chain=srcnat - out-interface=ether1 - tab Action - action=masquerade

Setting Route

ip - route - add - Dst-addres=0.0.0.0/0 - gateway=10.200.200.1

trus add route lagi

dst-address=172.16.200.0/29 - gateway=10.200.200.1

Config CLI R1

Setting Identitas

system identity set name=R1

Setting dhcp client

ip dhcp-client add interface=ether1 disabled=no

Setting ip Address

ip address add address=172.16.200.1/29 interface=ether2

ip address add address=10.200.200.1/30 interface=ether3

Setting dns server

ip dns set servers=8.8.8.8 allow-remote-requests=yes

Setting Nat

ip firewall nat add chain=srcnat out-interface=ether1 action=masquerade

Setting Route Static

ip route add dst-address=172.17.200.0/28 gateway=10.200.200.2